|
Description: 6' Access Ladder
Weight: 19.60 lbs.
Product Code: 170006
Width: 15" (center of beam-to-center of beam)
Rung distance: 11" (evenly spaced)
Constructed of high-strength steel.
This Access Ladder is stackable and can be attached to any of our Access Ladders.
The Access Ladder has a male and female end for stacking.
Assemble with the male end up.
The male Stacking Pin floats to make stacking easier!
Use our Ladder Bracket to attach our Access Ladders to the Scaffold Frame Leg.
OSHA requires the 1st step from the ground, or platform below to be less than 24".
OSHA requires a rest platform every 35' (or less)
The Access Ladder must be positioned as to not tip over the Scaffold!
Per OSHA, Cross Braces shall not be used as a means of access!
- Description: 6' Access Ladder
- Weight: 19.60 lbs.
- Product Code: 170006
- Width: 15" (center of beam-to-center of beam)
- Rung distance: 11" (evenly spaced)
- Constructed of high-strength steel.
- This Access Ladder is stackable and can be attached to any of our Access Ladders.
- The Access Ladder has a male and female end for stacking.
- Assemble with the male end up.
- The male Stacking Pin floats to make stacking easier!
- Use our Ladder Bracket to attach our Access Ladders to the Scaffold Frame Leg.
- OSHA requires the 1st step from the ground, or platform below to be less than 24".
- OSHA requires a rest platform every 35' (or less)
- The Access Ladder must be positioned as to not tip over the Scaffold!
- Per OSHA, Cross Braces shall not be used as a means of access!
Description: 6' Access Ladder
Weight: 19.60 lbs.
Product Code: 170006
Width: 15" (center of beam-to-center of beam)
Rung distance: 11" (evenly spaced)
Constructed of high-strength steel.
This Access Ladder is stackable and can be attached to any of our Access Ladders.
The Access Ladder has a male and female end for stacking.
Assemble with the male end up.
The male Stacking Pin floats to make stacking easier!
Use our Ladder Bracket to attach our Access Ladders to the Scaffold Frame Leg.
OSHA requires the 1st step from the ground, or platform below to be less than 24".
OSHA requires a rest platform every 35' (or less)
The Access Ladder must be positioned as to not tip over the Scaffold!
Per OSHA, Cross Braces shall not be used as a means of access!
|
