|
Description: Expandable Access Gate
Weight: 34.0 lbs.
Product Code: 250099
This Access Gate is the best on the market!
Expandable to work on all widths of Scaffold Walk-Thru Frames (3', 42", 4' & 5' wide).
The offset hinge-plate allows the Access Gate to be connected to System Scaffold Legs (Standards).
Perfect for use with Tube & Clamp, Ring-Lock & Cup-Lock Scaffold.
The Access Gate is 26¼” tall (center of top tube - to center of bottom tube).
A Nut & Bolt allows you to expand the Access Gate and "lock" into your desired width.
The Hinge Plate has 2 - 2" Half Clamps that are Dual Purpose, meaning you can connect this Access Gate to any tube that is 1⅝” Ø to 1.9” Ø.
The powder coat and hot-dipped galvanized finishes protect you against rust and scratches.
Meets OSHA requirements for Fall Protection.
- Description: Expandable Access Gate
- Weight: 34.0 lbs.
- Product Code: 250099
- This Access Gate is the best on the market!
- Expandable to work on all widths of Scaffold Walk-Thru Frames (3', 42", 4' & 5' wide).
- The offset hinge-plate allows the Access Gate to be connected to System Scaffold Legs (Standards).
- Perfect for use with Tube & Clamp, Ring-Lock & Cup-Lock Scaffold.
- The Access Gate is 26¼” tall (center of top tube - to center of bottom tube).
- A Nut & Bolt allows you to expand the Access Gate and "lock" into your desired width.
- The Hinge Plate has 2 - 2" Half Clamps that are Dual Purpose, meaning you can connect this Access Gate to any tube that is 1⅝” Ø to 1.9” Ø.
- The powder coat and hot-dipped galvanized finishes protect you against rust and scratches.
- Meets OSHA requirements for Fall Protection.
Description: Expandable Access Gate
Weight: 34.0 lbs.
Product Code: 250099
This Access Gate is the best on the market!
Expandable to work on all widths of Scaffold Walk-Thru Frames (3', 42", 4' & 5' wide).
The offset hinge-plate allows the Access Gate to be connected to System Scaffold Legs (Standards).
Perfect for use with Tube & Clamp, Ring-Lock & Cup-Lock Scaffold.
The Access Gate is 26¼” tall (center of top tube - to center of bottom tube).
A Nut & Bolt allows you to expand the Access Gate and "lock" into your desired width.
The Hinge Plate has 2 - 2" Half Clamps that are Dual Purpose, meaning you can connect this Access Gate to any tube that is 1⅝” Ø to 1.9” Ø.
The powder coat and hot-dipped galvanized finishes protect you against rust and scratches.
Meets OSHA requirements for Fall Protection.
|
