|
Description: Ladder Bracket
Weight: 5.0 lbs.
Product Code: 170110
Width: 15" (center of hole-to-center of hole)
Constructed of high-strength steel.
This Ladder Bracket can be used with any of our Access Ladders.
This Ladder Bracket is attached to a Scaffold Frame Leg using the attached 2" Dual Purpose Half Clamp.
This Ladder Bracket slides over each end of the Access Ladder.
Only 1-person should ascend, or descend via Access Ladder at a time!
OSHA requires the 1st step from the ground, or platform below to be less than 24".
OSHA requires a rest platform every 35' (or less)
The Access Ladder must be positioned as to not tip over the Scaffold!
Per OSHA, Cross Braces shall not be used as a means of access!
- Description: Ladder Bracket
- Weight: 5.0 lbs.
- Product Code: 170110
- Width: 15" (center of hole-to-center of hole)
- Constructed of high-strength steel.
- This Ladder Bracket can be used with any of our Access Ladders.
- This Ladder Bracket is attached to a Scaffold Frame Leg using the attached 2" Dual Purpose Half Clamp.
- This Ladder Bracket slides over each end of the Access Ladder.
- Only 1-person should ascend, or descend via Access Ladder at a time!
- OSHA requires the 1st step from the ground, or platform below to be less than 24".
- OSHA requires a rest platform every 35' (or less)
- The Access Ladder must be positioned as to not tip over the Scaffold!
- Per OSHA, Cross Braces shall not be used as a means of access!
Description: Ladder Bracket
Weight: 5.0 lbs.
Product Code: 170110
Width: 15" (center of hole-to-center of hole)
Constructed of high-strength steel.
This Ladder Bracket can be used with any of our Access Ladders.
This Ladder Bracket is attached to a Scaffold Frame Leg using the attached 2" Dual Purpose Half Clamp.
This Ladder Bracket slides over each end of the Access Ladder.
Only 1-person should ascend, or descend via Access Ladder at a time!
OSHA requires the 1st step from the ground, or platform below to be less than 24".
OSHA requires a rest platform every 35' (or less)
The Access Ladder must be positioned as to not tip over the Scaffold!
Per OSHA, Cross Braces shall not be used as a means of access!
|
