www.scaffoldstore.com

Description: 2" x 10" x 16' Laminated Veneer Lumber (LVL)

Weight: 62.4 lbs.

Product Code: 030067

Sold in bundles of 40 or 50 only (we offer great pricing, but can not break bundles).

Each bundle is wrapped to protect from UV exposure and moisture. Unlike our competitors, all of our lumber is kept inside warehouses, not under tarps!

• Veneer:
  
  - Thickness = 3.5mm (nominal)
  - Species = Radiata Pine
  - Joints = Scarf
  
  Moisture content: 6% - 18%
  
  Dimensional Tolerances:
  
  Length = -0, + 3/8"
  Width = -0, + 1/16"
  
  Adhesive: Phenolic
  
  For use in accordance with OSHA
  Maximum spans determine for standardized live loads in accordance with OSHA, Standards 29 CFR 1926.451 ans Subpart L, Appendix A.
  LOAD CONDITION
  
  
  SIMPLE SPAN LOADING CONDITION
  
  50lbs./sq. ft.
  
  6" 75lbs./sq. ft.
  1-person
  6" 2-Person
  6" 3-Person
  
  NOTES:
  
  1. Spans are from center to center of scaffold supports.
  2. Deflections are limited to L/60 per OSHA requirements.
  3. The "Person" load is defined by ANSI A10.8 as a 200 pound person with 50 pounds of equipment.
  4. The "1-Person" Load is applied at mid-span.
  5. The "2-Person" Load is applied with each "person" load placed 18" to either side of mid-span.
  6. The "3-Person" Load is applied with a "person" at mid-span, and a "person" load at 18" to either side of mid-span.
  7. For conditions other than those listed above, contact CHHWP or a professional engineer.
  8. Z-Plank meets all criteria and conditions as prescribed by OSHA and ANSI A10.8 standard.
  9. Planks are available in lengths of 8' to 20'.
  
  

Also known as "Glue Lam", "Glulam", and "MicroLam"